SoftForge
Marketplace

Products / Engineering tools for VS Code / Electronics Designer

Electronics Designer

Schematic and board design inside VS Code on your KiCad projects as they are, with an assistant that designs alongside you.

2.4.0
Open the product siteSee the line
Electronics Designer in VS Code showing a routed board zoomed on the Zynq-7020 ball grid, with the fan-out of tracks and vias across the copper layers.
Every layer of a dense board, down to the fan-out under the Zynq-7020.
A schematic sheet in Electronics Designer: the Zynq-7020 programmable-logic bank 35 symbol with its pin names, net labels and decoupling capacitors.
Schematic sheets that read like the datasheet, pin by pin.
Three-dimensional view of an assembled Zynq-7020 system-on-module in Electronics Designer, with the processor, memory and passives in place.
See the assembled board in 3D before it is made.

What it does

Schematics and boards with rules checked as you draw, routing that makes room as you push, circuit simulation, fabrication outputs and a 3D view.

Where it fits

Your assistant can draw, route and check alongside you, with the same commands as the editor's buttons.

Version
2.4.0
Opens
Your KiCad projects, unchanged
Delivers
Fabrication outputs and a 3D view

Related

  • HDL Studio

    Hardware design inside VS Code: step through simulation time in both directions, read millions of signal transitions without waiting, and go from code to a programmed board.

  • UI Designer

    A design tool inside VS Code: one design file next to your code, which your assistant edits with you.